This guide has been designed to help players get the most out of the San Bernardino Line: Los Angeles - San Bernardino Route Add-On. Below you will find information about the content available for this route, including links to community videos. Each of our video links demonstrate what a successful run may look like and can be used to help players having difficulty with a particular scenario.
Route Features
- Length: 57 miles
- Country: United States
- Operator: Metrolink
- Stations: 16
- Released: 17th September 2024
Locomotives
- EMD F125 Metrolink
- MP36PH-3C Metrolink
- Rotem Bi-Level Cab Car Metrolink
- BNSF GP60M (BNSF GP60M & GP60B Loco Add-On)
- BNSF GP60B (BNSF GP60M & GP60B Loco Add-On)
Training
- San Bernardino Route Introduction
- EMD F125 Introduction
- MP36PH-3C Introduction
- Rotem Cab Car Introduction
- BNSF GP60M Operations Instructions (Rebuilt Unit) (BNSF GP60M & GP60B Loco Add-On)
- BNSF GP60M Operations Instructions (Original Unit) (BNSF GP60M & GP60B Loco Add-On)
Rail Journeys
Metrolink Master (7 chapters, 20 services)
Metrolink Merriment (Metrolink Holiday Train Pack) (1 chapter, 6 services)
Super Fleet GP60M (BNSF GP60M & GP60B Loco Add-On) (1 chapter, 4 services)
Scenarios
- Race Way
- Depot Days
- Eye of the Storm
- Rescue at the Ranch
- Graduation Day
- Deck The Halls (Metrolink Holiday Train Pack)
- Santa's Coming to Town (Metrolink Holiday Train Pack)
- Driving Home for Christmas (Metrolink Holiday Train Pack)
- Intermodal Transfer
- Kaiser First Road-Switcher
- Pasadena Sub Local
- Steel Haul
Route Map
Frequently Asked Questions
What is the start-up procedure for the EMD F125 Metrolink?
- Turn on the Generator Field button.
- Insert the Reverser handle.
- Set the Brake mode to Passenger.
- Set the Reverser to Forward,
- Set the Automatic Brake to Release.
- Apply the throttle to get moving.
What is the start-up procedure for the MP36PH-3C Metrolink?
- Turn on the following switches:
- Fuel Pump
- Generator Field
- Engine Run
- Insert the Reverser handle.
- Set the Automatic Brake to Full Service.
- Set the Cut-Off Pilot Valve to Passenger.
- Set the Automatic Brake to Release.
- Apply the throttle to get moving.
What is the start-up procedure for the Rotem Bi-Level Cab Car Metrolink?
- Set the Cab Setup switch to Setup.
- Set the Generator Field switch to On.
- Set the Automatic Brake Cut-Out to Cut-In.
- Insert the Reverser handle.
- Set the Reverser to Forward.
- Set the Automatic Brake to Release.
- Apply the throttle to get moving.
Media
- San Bernardino Route Overview (trainsimulatordriver)
- Metrolink MP36PH 3C Tutorial (trainsimulatordriver)
- Metrolink Rotem Cab Car Tutorial (trainsimulatordriver)
- Metrolink F125 Tutorial (trainsimulatordriver)
- BNSF SD40 2 Tutorial (trainsimulatordriver)
- BNSF ES44C4 Tutorial (trainsimulatordriver)
- (Article) A brief history of the BNSF GP60M and GP60B
- (Article) BNSF GP60M & GP60B - Out Now!
Route Hopping
| Starting Point | Destination | ||
| Route | Location | Route | Location |
| San Bernardino | Los Angeles Union Station | Antelope Valley Line | Los Angeles Union Station |
| CMF | CMF | ||
| San Bernardino Depot Station | Cajon Pass | San Bernardino Depot Station | |
TSW Add-On Database
Please visit the Train Sim World Add-On Database for further details on this add-on, including:
- Game Mode & Feature Support
- Additional Layers
- Platform Differences
- Gen 8 Compatibility